| Continuous
Double Screw Press |
OUTLINE
SPECIFICATION
The
press is supplied complete and mounted on a steel frame
consisting of :-
| * |
drive
unit |
* |
cage |
| * |
speed
reducer |
* |
worm
screw |
| * |
intermediate
gear |
* |
hydraulic
power pack |
| * |
main
casing |
* |
starter
board |
|
TECHNICAL
SPECIFICATION
|
| MODEL
NAME |
Continuous
Double Screw Press |
| MODELS |
PMT10
/ PMT15 |
| CAPACITY |
10 Tons per Hour / 15 Tons per Hour |
|
MAIN
MOTOR SECTION
|
|
MOTOR
|
TEFC
Squirred Cage |
POWER
|
30
HP x 1000 rpm 380/440 Volts 50/60 Hz |
MAKE
|
Teco,
Electrim or Equivalent |
|
GEAR
REDUCER
|
|
INPUT
SPEED
|
365rpm |
SPEED
RATIO
|
60
: 1 |
MODEL
|
R163 |
OUTPUT
SPEED
|
8
- 10 rpm |
MAKE
|
SEW
or Equivalent |
INTERMEDIATE
GEAR BOX
The gear box is housed in rigid
gear case fabricated from Mild Steel Plate and properly
assembled with gear shaft and bearing.
| GEAR |
Spur
gear machined from high carbon steel |
| SHAFT |
Machined
from high carbon steel |
| GEAR
CASE |
Fabricated
from mild steel |
| BEARING |
Self-aligning
roller bearing |
PRESS
CAGE
The press cage is made of carbon steel with perforations
of 2mm uniformly positioned. The case is reinforced
on the outside with 12mm thick mild steel stiffener
plate. Provision of stainless steel sleeve can be provided
at extra cost and subject to confirmation at time of
order.
WORM
SCREW
The worm screw of Diameter 270 mm is made of Alloy Steel
and machined to tolerance The flights are of constant
pitch.
HYDRAULIC
POWER PACK
Control the cone cylinder motion propotionally and steplessly.
| MAKE |
Vickers
or Rexroth |
| MOTOR |
TEFC
1.5 KW / 2HP Squirrel cage |
| MAX.PRESSURE |
100
Bar |
| CAPACITY |
250
litres |
| TYPE
OF OIL |
Shell
Tellus 27 or Equivalent |
POWER
CYLINDER
|
Heavy
duty 6" bore x 12" stroke
W30 - TR - NC - HIST - IRSH - AU30 |
ELECTRICAL
CONTROL PANEL
One unit complete with isolating switch, ammeter, manual
adjustment switch, selection switch and indicator lights.
The Resistant starter for the press motor and D.O.L
starter for the hydraulic pump motor.
FLUID
COUPLING (OPTIONAL)
Fluid coupling is optional item and shall be incorporated
upon request prior to confirmation of order.
BRAND
|
Westcar
or Equivalent |
| TYPE |
Pulley
mounting x 4c x 250 mm dia. |
| SHIPPING
DETAIL |
|
| MACHINE
LENGTH |
4900mm |
| MACHINE
WIDTH |
1478mm |
| MACHINE
HEIGHT |
1035mm |
| APPROXIMATE
WEIGHT |
5700
kg gross , 5460 kg nett. |
The
above data are subjected to changes without prior notice.
The manufacturer reserves the rights to alter the machine
which he deems fit in the interest of improving the
performance of the machine
|
